Sound Adjustments

Sound Adjustments - AM/FM in-dash CD6/MP3 satellite compatible Lincoln premium sound/THX audio system - Audio systems - Entertainment Systems - Lincoln MKZ Owners Manual - Lincoln MKZ

Press SOUND repeatedly to cycle through the following features:

BASS: Press SEEK SEEK to adjust the level of bass. to adjust the level of bass.

TREBLE: Press SEEK SEEK to adjust the level of treble. to adjust the level of treble.

BALANCE: Press SEEK SEEK to adjust the audio between the left to adjust the audio between the left (L) and right (R) speakers.

FADE: Press SEEK SEEK to adjust the audio between the back (B) to adjust the audio between the back (B) and front (F) speakers.

SPEED COMPENSATED VOLUME: With this feature on, radio volume automatically gets louder with increasing vehicle speed to compensate for road and wind noise.

The default setting is off.

Use SEEK SEEK to adjust between SPEED OFF and levels 1–7: to adjust between SPEED OFF and levels 1–7:

Increasing the level from 1 (lowest setting) to 7 (highest setting) allows the radio volume to automatically change slightly with vehicle speed to compensate for road and wind noise.

Recommended level is 1–3; SPEED OFF turns the feature off and level 7 is the maximum setting.

ALL SEATS (Occupancy mode, if equipped): Press SOUND repeatedly to reach the Occupancy mode setting. Press SEEK SEEK to to select and optimize sound for ALL SEATS, DRIVERS SEAT or REAR SEATS.

    See also:

    Fuses
    If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing an ...

    Message center
    Your vehicle’s message center allows you to configure/personalize certain vehicle options to suit your needs. The message center is also capable of monitoring many vehicle systems and will alert ...

    Removing the spare tire and jack
    1. Remove the carpeted load floor panel located in the rear of the vehicle and remove the lug wrench and long bolt from the tool bag. 2. Remove the bolt securing the spare tire using the lu ...