See also:

Replacing exterior bulbs
Check the operation of all the bulbs frequently. Replacing headlamp bulbs Check the operation of all bulbs frequently. 1. Make sure that the headlamp control is in the off position. 2. Open the ...

How to use the engine block heater
Ensure the receptacle terminals are clean and dry prior to use. To clean them, use a dry cloth. Depending on the type of factory installed equipment, your engine block heater will use .4 to 1.0 k ...

Replacing supplemental park bulbs
1. Make sure the headlamp switch is in the off position, then open the hood. 2. At the wheel well, remove the press pins from the splash shield, then pull the splash shield back to gain a ...