Replacing backup lamp/supplemental tail lamp
The backup lamp and supplemental tail lamps are located in the trunk lid. Follow the same steps to replace either lamp.
1. Make sure the headlamp switch is in the off position and open trunk to access the lamp assembly.
2. Position the decklid trim aside by removing 3 to 4 pin-type retainers to expose the lamp assembly.
3. Remove the bulb socket by rotating it counterclockwise, then pull it out of the lamp assembly.
4. Pull the bulb from the socket and push in the new bulb.
5. Install the bulb socket into the lamp assembly by rotating it clockwise.
6. Carefully reposition the trim back to its original position and secure the retainers.
See also:
Windshield washer fluid
Add fluid to fill the reservoir if the
level is low. In very cold weather, do
not fill the reservoir completely.
Only use a washer fluid that meets
Ford specifications. Do not use any
speci ...
Vehicle storage
If you plan on storing your vehicle for an extended period of time
(30 days or more), refer to the following maintenance recommendations
to ensure your vehicle stays in good operating condition.
...
Unlocking the doors/two-stage unlock
Press and release to unlock all
the doors.
Note: The interior lamps and parking lamps will illuminate.
The remote entry system activates the illuminated entry feature; this
feature turns on t ...