Deactivating the memory feature

Deactivating the memory feature - Memory feature - Remote entry system - Locks and Security - Lincoln MKZ Owners Manual - Lincoln MKZ

To deactivate this feature:

1. Press and hold either the 1 or 2 control on the driver’s door for five seconds. (A tone will be heard after 11⁄2 seconds when the memory store is done) continue to hold until a second tone is heard after five seconds.

2. Within three seconds press the on the transmitter. on the transmitter.

3. A tone will be heard when the deactivation is complete.

4. Repeat this procedure for another transmitter if desired.

    See also:

    System check and vehicle feature customization
    Press the SETUP button repeatedly to cycle the message center through the following features: 1. OIL LIFE 2. WASHER FLUID LEVEL 3. DOOR AJAR STATUS 4. TRUNK AJAR/CLOSED 5. BLIND SPOT SY ...

    Gate Operator & Canadian Programming
    During programming, your hand-held transmitter may automatically stop transmitting — not allowing enough time for HomeLink to accept the signal from the hand-held transmitter. After compl ...

    Starting your vehicle
    This system meets all Canadian interference-causing equipment standard requirements regulating the impulse electrical field strength of radio noise. Don’t press the accelerator before or during sta ...