Switching off AdvanceTrac
If the vehicle is stuck in snow, mud or sand, and seems to lose engine power, switching off certain features of the AdvanceTrac system may be beneficial because the wheels are allowed to spin. This will restore full engine power and will enhance momentum through the obstacle.
To turn off the traction control system, press the stability control off switch. The off switch could look like either of the two graphics shown. Full features of the AdvanceTrac system can be restored by pressing the switch again or by turning off and restarting the engine.
When the traction control system is off, the stability control off light will illuminate steadily. Pressing the stability control switch again will turn off the stability control off light.
In R (Reverse), ABS and the engine and brake traction control features will continue to function; however, ESC is disabled.
See also:
Tire change procedure
WARNING: To help prevent the vehicle from moving when you
change a tire, be sure the parking brake is set, then block (in
both directions) the wheel that is diagonally opposite (other side and
e ...
Third generation
The 2007 Navigator was unveiled at the Chicago Auto Show in February 2006. It
is joined by a long wheelbase Navigator L based on the Expedition EL and shares
the new Ford T1 platform with that veh ...
All-new interior brimming with functionality and craftsmanship
The interior of the 2011 Lincoln MKX reflects an even greater emphasis on
what defines Lincoln DNA: luxury, craftsmanship, genuine materials and sharper
execution.
Gentle details that bring out ...