BLIS -CTA on/off and disable operation
The BLIS and/or the CTA can be turned off via the message center.
Turning the BLIS off does not turn off the CTA and vice-versa. If either the BLIS or CTA is turned off, the systems will automatically turn back on at the next ignition key cycle. When either the BLIS or CTA is turned off, the message center displays BLIND SPOT SYS OFF and/or CTA SYSTEM OFF. When the BLIS or CTA system is off, the driver will not receive alerts. Refer to Message center in the Instrument Cluster chapter.
The BLIS -CTA can be disabled permanently even after an ignition key cycle. This must be done by your dealership service technician.
Once either of the systems are disabled, enabling must also be performed at the dealership. When disabled, the message center will display BLIND SPOT DISABLED and/or CTA DISABLED.
See also:
Information
In this mode, you can view different vehicle system information and
perform a system check.
*Some items will only display during a system check if a problem has
been detected.
System warnings ...
Changing the tires
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the roa ...
Ford esp extended service plans (U.S. only)
More than 32 million Ford and Lincoln owners have discovered the
powerful protection of Ford ESP. It is the only extended service plan
backed by Ford Motor Company, and provides “peace of mind”
...