Brake fluid
The fluid level will drop slowly as the brakes wear, and will rise when the brake components are replaced.
Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately.
See also:
Connecting the jumper cables
Note: In the illustration, the vehicle on the bottom is used to
designate
the assisting (boosting) battery.
1. Connect the positive (+) jumper
cable to the positive (+) terminal of
the disc ...
Hazard flasher control
The hazard flasher is located
between the center air registers
above the radio. The hazard flashers
will operate whether the ignition is
off or on.
• Press the flasher control and all
fro ...
Driving on snow and ice
Note: Excessive tire slippage can cause transmission damage.
AWD vehicles have advantages over 2WD vehicles in snow and ice but
can skid like any other vehicle.
Should you start to slide while dri ...