Bounce-back
When an obstacle has been detected in the window opening as the window is moving upward, the window will automatically reverse direction and move down. This is known as “bounce-back”. If the ignition is turned off (without accessory delay being active) during bounce-back, the window will move down until the bounce-back position is reached.
Security override
To override a bounce-back condition, within two seconds after the window reaches the bounce-back position, pull and hold the switch up and the window will travel up with no bounce-back or pinch protection. If the switch is released before the window is fully closed, the window will stop. For example, this can be used to overcome the resistance of ice on the window or seals.
See also:
Unlocking and locking the doors using keyless entry
To unlock the driver’s door, enter the factory set 5-digit code or
your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate. Note: If ...
Global open windows
Press and hold to begin opening
the two front windows and venting
the panoramic roof (if equipped).
• The control can then be released
and the windows and panoramic
roof will complete the ...
Driving off-highway with AWD vehicles
AWD vehicles are equipped for driving on sand, snow, mud and rough
roads and have operating characteristics that are somewhat different
from conventional vehicles, both on and off the highway.
...