Setting adaptive cruise control
Note: It is the driver’s responsibility to stay alert, drive safely and be in control of the vehicle at all times.
The controls for using your cruise control are located on the steering wheel.
1. Press and release the ON control.
The message center will display CRUISE ON RADAR READY
2. Accelerate to the desired speed.
3. Press and release the SET +
control. The vehicle speed will be
stored in the memory and the
message center will display SET
XXX MPH (your desired speed).
4. Take your foot off the accelerator
pedal.
5. The green cruise indicator light on the instrument cluster will illuminate if there are no vehicles detected in front of you, while the yellow ACC indicator light on the instrument cluster will illuminate if there is a vehicle detected in front of you.
See also:
Information about uniform tire quality grading
Tire Quality Grades apply to new
pneumatic passenger car tires. The
Quality grades can be found where
applicable on the tire sidewall
between tread shoulder and
maximum section width. For ...
Remote start
The remote start feature allows you to start the engine from outside the
vehicle. If your transmitter has a
icon, you have remote start. The
remote start feature has an extended operating range ...
Installing child safety seats with combination lap and shoulder belts
Check to make sure the child seat is properly secured before each use.
When installing a child safety seat with combination lap/shoulder belts:
• Use the correct safety belt buckle for that seating ...