Unlocking the doors/two-stage unlock

Unlocking the doors/two-stage unlock  - Remote entry system - Locks and Security - Lincoln MKS Owners Manual - Lincoln MKS

Press the doors. and release to unlock all the doors.

Note: The interior lamps and parking lamps will illuminate.

The remote entry system activates the illuminated entry feature; this feature turns on the lamps for 25 seconds or until the ignition is turned on.

The battery saver feature will turn off the interior lamps 10 minutes after the ignition is turned off.

If two-stage unlocking is enabled:

1. Press the driver’s door. and release to unlock the driver’s door.

Note: The interior lamps and parking lamps will illuminate.
2. Press  within three seconds to unlock all the and release again within three seconds to unlock all the doors.

Two-stage unlocking may be disabled or enabled by simultaneously pressing the controls on the transmitter for and four seconds controls on the transmitter for four seconds (disabling two stage unlock allows all vehicle doors to unlock simultaneously). The parking lamps will illuminate twice to indicate that two-stage unlock was enabled or disabled. The unlocking mode will be applied to remote entry, keyless entry and intelligent access.

Two-stage unlocking may also be disabled or enabled through the message center if this is an available message center option or by your authorized dealer. Refer to Message center in the Instrument Cluster chapter.

When two-stage unlocking is disabled, intelligent access at the driver’s door results in an unlock of all doors (not just the driver door).

    See also:

    Keys
    Keys Your vehicle is equipped with two Integrated Keyhead Transmitters (IKTs). The key blade functions as a programmed key which starts the vehicle and unlocks/locks all the doors. The ...

    Safety belt extension assembly
    If the safety belt is too short when fully extended, a safety belt extension assembly can be obtained from an authorized dealer. Use only extensions manufactured by the same supplier as the safet ...

    Location of the tire label
    You will find a Tire Label containing tire inflation pressure by tire size and other important information located on the B-Pillar or the edge of the driver’s door. Refer to the payload descriptio ...