Driving

See also:
Readiness for Inspection/Maintenance (I/M) testing
Some state/provincial and local governments may have
Inspection/Maintenance (I/M) programs to inspect the emission control
equipment on your vehicle. Failure to pass this inspection could prevent ...
Rolling code programming
Note: If you do not follow the time-sensitive instructions, the device
will
time out and you will have to repeat the complete procedure.
Note: It may be helpful to have another person assist you ...
Replacing backup lamp/supplemental tail lamp
The backup lamp and supplemental tail lamps are located in the trunk
lid. Follow the same steps to replace either lamp.
1. Make sure the headlamp switch is
in the off position and open trunk ...
