BLIS and/or CTA on/off and disable operation
The BLIS and/or the CTA can be turned off via the message center. If either the BLIS and/or the CTA is turned off, the systems will automatically turn back on at the next ignition key cycle. When either the BLIS and/or the CTA is turned off, the message center displays BLIND SPOT SYS OFF and/or CTA SYSTEM OFF. When the BLIS and/or the CTA system is off, the driver will not receive alerts. Refer to Message center in the Instrument Cluster chapter.
Note: If the system cannot be turned off, refer to MyKey in the Locks and Security chapter for more information.
The BLIS and/or the CTA can be disabled permanently even after an ignition key cycle. This must be done by your authorized dealer. Note:
Once either of the systems are disabled, enabling must also be performed at the dealership. When disabled, the message center will display BLIND SPOT DISABLED and/or CTA DISABLED.
See also:
HomeLink Wireless Control System
The HomeLink Wireless Control
System, located on the driver’s visor,
provides a convenient way to
replace up to three hand-held
transmitters with a single built-in
device. This feature will ...
Front crash severity sensor
The front crash severity sensor enhances the ability to detect the
severity of an impact. Positioned up front, it provides valuable
information early in the crash event on the severity of the impa ...
All-wheel drive
All-wheel drive is standard with the twin-turbo 3.5-liter V6. In good weather
over smooth roads at modest speeds - when AWD is not needed - the system
intelligently routes power only to the front wh ...