Transmission code designations
You can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents.
See also:
Fixed code programming
Note: It may be helpful to have another person assist you in
programming the transmitter.
To program units with fixed code
DIP switches, you will need the
garage door hand-held transmitter, ...
Gate Operator & Canadian Programming
During programming, your
hand-held transmitter may
automatically stop transmitting —
not allowing enough time for
HomeLink to accept the signal
from the hand-held transmitter.
After compl ...
Power liftgate
You can power open or close the liftgate with the following controls:
• Instrument panel control button
• Transmitter button
• Outside liftgate control button
• Control button in the rear car ...