Changing the set speed

Changing the set speed - Using adaptive cruise control - Adaptive cruise control (acc) (if equipped) - Driver Controls - Lincoln MKX Owners Manual - Lincoln MKX

There are three ways to change the set speed:

• Accelerate or brake to the desired speed and press SET upward and release.
• Increase or decrease the speed by holding SET upward or downward until the desired set speed is shown on the message center. The vehicle speed will gradually change to the selected speed.
• Increase or decrease the speed in increments of 1 mph (2 km/h) by briefly pressing the SET upward or downward.

The ACC may apply the brakes to slow the vehicle down to the new set speed. The set speed will display continuously in the message center while ACC is active.

    See also:

    Rear seat head restraints
    Your vehicle is equipped with rear seat outboard head restraints that look differently than the front head restraints, but function similarly. WARNING: To minimize the risk of neck injury in the ev ...

    Owner Checks and Services
    Certain basic maintenance checks and inspections should be performed by the owner or a service technician at the intervals indicated. Service information and supporting specifications are provided ...

    Four-wheel anti-lock brake system (ABS)
    Your vehicle is equipped with an anti-lock braking system (ABS). This system helps you maintain steering control during emergency stops by keeping the brakes from locking. Noise from the ABS pump ...