Switching to normal cruise control
You can manually change from adaptive cruise control (ACC) to normal
cruise control through the message center. Refer to Message center in
the Instrument Cluster chapter. If normal cruise control is selected, the
ACC indicator light will be replaced with a
cruise control indicator
light. The gap setting will not be displayed, the system will not
automatically respond to lead vehicles and automatic braking will not be
activated. The system will default to ACC when the engine is started.
WARNING: Normal cruise control will not brake due to slower vehicles. Always be aware of which mode is selected and apply the brakes when necessary.
See also:
Rear courtesy lamp
Located in the rear cargo area, the
courtesy lamp lights when:
• any door is opened.
• any of the remote entry controls
are pressed and the ignition is
off.
The courtesy lamp can also be ...
Blind spot information system (blis ) with cross traffic alert (cta) (if
equipped)
The BLIS is a convenience feature
that aids the driver in assessing
whether a vehicle is within an area
on either side of the vehicle
extending rearward from the outside
mirrors to approxi ...
One-touch up or down (front windows only)
This feature allows the driver or passenger’s window to open or close
fully without holding the control down.
To operate one-touch down, press the switch completely down to the
second detent an ...