Reprogramming a single HomeLink button

Reprogramming a single HomeLink button - Universal garage door opener - Driver Controls - Lincoln MKX Owners Manual - Lincoln MKX

To program a device to HomeLink using a HomeLink button previously trained, follow these steps:

1. Press and hold the desired HomeLink button. Do NOT release the button.
2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink button, follow Step 1 in the Programming section.

For questions or comments, contact HomeLink at www.homelink.com or 1–800–355–3515.

    See also:

    MKZ Engines, Transmissions and Drive Systems
    The 2013 Lincoln MKZ offers three distinct powertrains. The standard 2.0-liter four-cylinder EcoBoost® delivers the performance of a traditional V6 along with expected segment-leading fuel economy ...

    Programming spare intelligent access keys
    You must have two previously programmed intelligent access keys inside the vehicle and the new unprogrammed intelligent access keys readily accessible. If two previously programmed keys are not av ...

    Changing the set speed
    There are three ways to change the set speed: • Accelerate or brake to the desired speed and press SET upward and release. • Increase or decrease the speed by holding SET upward or downward u ...