Check MyKey system status

The vehicle’s message center information menu will provide the status of the following MyKey parameters:
• MYKEY MILES (km) — This odometer only tracks distance when a
MyKey is used. If distance does not accumulate as expected, then
the MyKey is not being used by the intended user. The only way to
reset this odometer to zero is by clearing MyKey . If this odometer is
lower than the last time you checked, then the MyKey system has
been recently cleared.
• # MYKEY(S) PROGRAMMED — Indicates how many MyKeys are
programmed to the vehicle. Can be used to detect deletion of a
MyKey .
• # ADMIN KEYS PROGRAMMED — Indicates how many admin keys
are programmed to the vehicle. Can be used to detect if an additional
spare key has been programmed to the vehicle.
Refer to Message center in the Instrument Cluster chapter for MyKey system warnings displays.
See also:
Four-wheel anti-lock brake system (ABS)
Your vehicle is equipped with an anti-lock braking system (ABS). This
system helps you maintain steering control during emergency stops by
keeping the brakes from locking. Noise from the ABS pump ...
Changing the set speed
There are three ways to change the
set speed:
• Accelerate or brake to the
desired speed and press and
release the SET + or SET –
control
• Increase or decrease the speed by
holding eit ...
Hazard flasher control
The hazard flasher control is located
on the instrument panel by the
radio. The hazard flashers will
operate when the ignition is in any
position or if the key is not in the
ignition.
• P ...
