Starting the engine with remote start
The remote start label on your transmitter details the engine starting procedure. To start the engine using remote start:
Note: Each button press must be done within three seconds of each other. If this sequence is not followed, the vehicle will not remote start and the horn will not chirp.
1. Press to lock all the
doors.
2. Press two times. The exterior
lamps will flash twice.
If for some reason, the system fails to start, the horn will chirp.
Note: If the vehicle has been remote started, you must press the START/STOP button on the instrument panel once while applying the brake pedal before driving the vehicle.
The power windows will be inhibited during the remote start and the radio will not turn on.
The parking lamps will remain on and the engine will run for 5, 10, or 15 minutes, depending on how you programmed the system. To select the duration of the remote start system refer to Message center in the Instrument Cluster chapter.
See also:
Power side view mirrors
WARNING: Do not adjust the mirror while the vehicle is in
motion.
To adjust your mirrors:
1. Rotate the control clockwise to
adjust the right mirror and rotate
the control counterclock ...
Fuses
If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any ...
Safety
Four-wheel-disc antilock brakes, traction control and an electronic stability
system are standard. The MKZ's six standard airbags include side-impact airbags
for the front seats and side curtain a ...