BLIS and/or CTA on/off and disable operation
The BLIS and/or the CTA can be turned off via the message center. If either the BLIS and/or the CTA is turned off, the systems will automatically turn back on at the next ignition key cycle. When either the BLIS and/or the CTA is turned off, the message center displays BLIND SPOT SYS OFF and/or CTA SYSTEM OFF. When the BLIS and/or the CTA system is off, the driver will not receive alerts. Refer to Message center in the Instrument Cluster chapter.
Note: If the system cannot be turned off, refer to MyKey in the Locks and Security chapter for more information.
The BLIS and/or the CTA can be disabled permanently even after an ignition key cycle. This must be done by your authorized dealer. Note:
Once either of the systems are disabled, enabling must also be performed at the dealership. When disabled, the message center will display BLIND SPOT DISABLED and/or CTA DISABLED.
See also:
Interior
The problem with the MKT is that it's a Lincoln, and Ford's luxury brand is
still a work in progress when it comes to interior materials. Everything is
fairly nice, but compared with a Lexus or Ac ...
Easy Fuel “no cap” fuel system
Your fuel tank is equipped with an Easy Fuel “no cap” fuel filler system.
This allows you to simply open the fuel filler door and insert the fuel
filler nozzle into the fuel system. The Easy Fuel ...
Special operating conditions
If you operate your vehicle primarily in any of the following conditions,
you need to perform additional maintenance as indicated. If you
occasionally operate your vehicle under any of these condi ...