Hazard flasher control
The hazard flasher control is located on the instrument panel by the radio. The hazard flashers will operate when the ignition is in any position or if the key is not in the ignition.
• Press the flasher control and all front and rear direction signals will
flash.
• Press the flasher control again to turn them off.
Use it when your vehicle is disabled and is creating a safety hazard for other motorists.
Note: With extended use, the flasher may run down your battery.
See also:
Technology and Features
Besides the looks, impressive steering and comfortable seating, the other
thing the MKS has going for it is an intuitive, feature-packed technology
center. Unfortunately, the attractive base price ...
Anti-scan feature
If the wrong code has been entered seven times (35 consecutive button
presses), the keypad will go into an anti-scan mode. This mode disables
the keypad for one minute and the keypad lamp will fla ...
Turn signal control
The turn signal lever does not mechanically lock in the upward or
downward position when activated. The turn signal control activation and
cancellation is electronic.
• To operate the left turn ...