See also:

Jump starting
1. Start the engine of the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both ...

Locking the doors
1. Press and release to lock all the doors. The turn signal lamps will illuminate. 2. Press and release again within three seconds to confirm that all the doors are closed. Note: The doors ...

Replacing headlamp bulbs
High beam/low beam bulb replacement For driver side replacement of the high beam/low beam bulbs, do the following: 1. Make sure the headlamp switch is in the off position, then open the hood. 2 ...