See also:

Arming the system
The system is ready to arm whenever the ignition is off. To arm the system, do one of the following: • Press the control on the remote entry transmitter. Note: If you press the control t ...

Removing the jumper cables
Remove the jumper cables in the reverse order that they were connected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove ...

Tire change procedure
WARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park). WARNING: To ...