Disengaging speed control

Disengaging speed control  - Speed control - Driver Controls - Lincoln MKZ Owners Manual - Lincoln MKZ

Press the brake pedal to disengage the speed control. Disengaging the speed control will not erase the previous set speed.

    See also:

    Connecting the jumper cables
    Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discha ...

    Trailer tow connector (vehicles equipped with a Class II trailertow/prep package)
    The trailer tow connector is located under the rear bumper, on the driver’s side of the vehicle. Refer to the following chart for information regarding the factory-equipped trailer tow connecto ...

    Autounlock feature (if enabled)
    The autounlock feature will unlock all the doors when: • the ignition is on, all the doors are closed, and the vehicle has been in motion at a speed greater than 12 mph (20 km/h); • the vehicle ...