Combining safety belt and LATCH lower anchors for attaching child safety seats

When used in combination, either the safety belt or the LATCH lower anchors may be attached first, provided a proper installation is achieved.
Attach the tether strap afterward, if included with the child seat. Refer to Recommendations for attaching child safety restraints for children in this chapter.
See also:
Safety belt locking modes
All safety restraints in the vehicle are combination lap and shoulder
belts. The driver safety belt has the first locking mode and the front
outboard passenger and rear seat safety belts have both ...
Unlocking the doors/two-stage unlock
Press and release to unlock all
the doors.
Note: The interior lamps and parking lamps will illuminate.
The remote entry system activates the illuminated entry feature; this
feature turns on t ...
Starting your vehicle
This system meets all Canadian interference-causing equipment standard
requirements regulating the impulse electrical field strength of radio noise.
Don’t press the accelerator before or during sta ...
