Fog lamp control
With the ignition on, the fog lamps can be turned on when the headlamp control is pulled toward you and is in any of the following positions:
• Parking lamps
• Low beams
• Autolamps (when active)
The fog lamp indicator light will illuminate when the fog lamps have been turned on. The fog lamps will not operate when the high beams are active.
High beams
Push the lever toward the instrument panel to activate. Pull the lever towards you to deactivate.
See also:
Detection issues
The radar sensor has a limited field of vision. In some situations it may
not detect vehicles at all or detect a vehicle later than expected.
Detection issues can occur:
• When driving on a di ...
Setting adaptive cruise control
1. Press and release ON. The
message center will display the
gray ACC indicator light, current
gap setting and SET.
2. Accelerate to the desired speed.
3. Press SET upward and release.
...
Changing the set speed
There are three ways to change the
set speed:
• Accelerate or brake to the
desired speed and press and
release the SET + or SET –
control
• Increase or decrease the speed by
holding eit ...