See also:

Adding engine coolant
When adding coolant, make sure it is a 50/50 mixture of engine coolant and distilled water. Add the mixture to the coolant reservoir, when the engine is cool, until the appropriate fill level is o ...

Removing the jumper cables
Remove the jumper cables in the reverse order that they were connected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove ...

Daytime running lamps (DRL) (if equipped)
To activate: • the ignition must be in the on position, • the headlamp control must be in the off, autolamps or parking lamp position and • the transmission must be out of the P (Park) positi ...