Switching off AdvanceTrac
If the vehicle is stuck in snow, mud or sand, and seems to lose engine power, switching off certain features of the AdvanceTrac system may be beneficial because the wheels are allowed to spin. This will restore full engine power and will enhance momentum through the obstacle.
To turn off the AdvanceTrac system, press the traction control off switch. The off switch could look like either of the two graphics shown. Full features of the AdvanceTrac system can be restored by pressing the traction control off switch again or by turning off and restarting the engine.
If you switch off the AdvanceTrac system, the stability control off light will illuminate steadily. Pressing the AdvanceTrac control switch again will turn off the stability control off light.
In R (Reverse), ABS and the engine traction control and brake traction control features will continue to function; however, ESC is disabled.
See also:
Turn signal control
• Push down to activate the left
turn signal.
• Push up to activate the right turn
signal.
...
If your vehicle goes off the edge of the pavement
• If your vehicle goes off the edge of the pavement, slow down, but
avoid severe brake application, ease the vehicle back onto the
pavement only after reducing your speed. Do not turn the steering ...
Using speed control
The speed controls are located on the steering wheel. The following
buttons work with speed control:
SET: Press to set a speed or to
increase or decrease the set speed.
RES (Resume): Press t ...