Gauges

See also:
Reprogramming a single HomeLink button
To program a device to HomeLink using a HomeLink button previously
trained, follow these steps:
1. Press and hold the desired HomeLink button. Do NOT release the
button.
2. The indicator ligh ...
BLIS and/or CTA fault operation
If the BLIS and/or CTA senses a fault on either the left or right sensor,
the BLIS alert indicator will go on and remain on and the message
center will display BLIND SPOT SYSTEM FAULT or CROSS TRA ...
Sand
When driving over sand, try to keep all four wheels on the most solid
area of the trail. Avoid reducing the tire pressures but shift to a lower
gear and drive steadily through the terrain. Apply t ...
