Global open windows

Press and hold
to begin opening
the two front windows and venting
the panoramic roof (if equipped).
• The
control can then be released
and the windows and panoramic
roof will complete the opening operation.
• If
or
is pressed during the opening
operation, both windows
and panoramic roof movement will stop.
Note: The ignition must be off and the accessory delay feature must be not activated in order for this feature to operate.
See also:
Reprogramming a single HomeLink button
To program a device to HomeLink using a HomeLink button previously
trained, follow these steps:
1. Press and hold the desired HomeLink button. Do NOT release the
button.
2. The indicator ligh ...
Adding engine oil
1. Check the engine oil. For instructions, refer to Checking the engine
oil in this chapter.
2. If the engine oil level is not within the normal operating range, add
only certified engine oil of ...
Tire change procedure
WARNING: To help prevent the vehicle from moving when you
change a tire, be sure the parking brake is set, then block (in
both directions) the wheel that is diagonally opposite (other side and
e ...
