Easy entry/exit feature

This feature automatically moves the steering wheel all the way up and in and moves the driver’s seat rearward 2 in. (5 cm) when:
• the transmission is in N (Neutral) or P (Park)
• the ignition is turned off
The seat and steering wheel will move to the original position when:
• the transmission is in N (Neutral) or P (Park)
• the ignition is put in accessory mode/started
The easy entry feature can be turned off or on through the vehicle message center. Refer to Message center in the Instrument Cluster chapter.
See also:
Flash-to-pass
Pull toward you slightly to activate
and release to deactivate. ...
Using the power lumbar support
The power lumbar control is located on the outboard side of the seat.
Press one side of the control to
adjust firmness.
Press the other side of the control
to adjust softness.
...
Blocked sensor
An extreme build-up of materials on
the quarter panel fascias such as
mud or snow can cause degraded
performance of the BLIS . Also,
heavy rain can cause the same
effect. The BLIS can detect ...
