See also:

Starting your vehicle
This system meets all Canadian interference-causing equipment standard requirements regulating the impulse electrical field strength of radio noise. Don’t press the accelerator before or during sta ...

Power door unlock/lock procedure
Before starting, ensure the ignition is in the off position and all vehicle doors are closed. You must complete Steps 1–5 within 30 seconds or the procedure will have to be repeated. If the proced ...

Connecting the jumper cables
Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discha ...