See also:

Erasing personal code
1. Enter the factory set 5–digit code. 2. Within five seconds, press the 1 • 2 on the keypad and release. 3. Press and hold the 1 • 2 for two seconds. This must be done within five seconds of comp ...

Hazard flasher control
The hazard flasher is located between the center air registers above the radio. The hazard flashers will operate whether the ignition is off or on. • Press the flasher control and all fro ...

Connecting the jumper cables
Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Connect the positive (+) jumper cable to the positive (+) terminal of the disc ...