See also:

BLIS -CTA fault operation
If the BLIS -CTA senses a fault on either the left or right sensor, the BLIS alert indicator will go ON and remain ON and the message center will display BLIND SPOT SYSTEM FAULT or CROSS TRAFFIC S ...

Replacing front parking lamp/turn signal/sidemarker bulbs
1. Make sure headlamp switch is in the off position, then open the hood. 2. Reach in behind the headlamp assembly to access the bulb sockets and connectors. 3. Locate the parking/turn signal l ...

Daytime running lamps (DRL) (if equipped)
To activate: • the ignition must be in the on position, • the headlamp control must be in the off, autolamps or parking lamp position and • the transmission must be out of the P (Park) positi ...