Brake fluid
The fluid level will drop slowly as the brakes wear, and will rise when the brake components are replaced.
Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately.
See also:
Collision warning system (if equipped)
The collision warning with brake support, is designed to alert the driver
of certain collision risks with a red warning light located above the
dashboard and an audible warning chime. The brake su ...
Torque vectoring control
Drivers are most likely to notice Lincoln's new Torque Vectoring Control
(TVC) system when Lincoln Drive Control is set to Sport Mode. TVC helps the
Lincoln MKS drive through corners with greater ba ...
Front passenger sensing system
The front passenger sensing system is designed to meet the regulatory
requirements of Federal Motor Vehicle Safety Standard (FMVSS) 208
and is designed to disable (will not inflate) the front pass ...