Tilting head restraints (if equipped)

The front head restraints may have a tilting feature for extra comfort. To tilt the head restraint, do the following:
1. Adjust the seatback to an upright driving/riding position.

2. Pivot the head restraint forward towards your head to the desired location.
After the head restraint reaches the forward-most tilt position, pivoting it forward again will then release it to the rearward un-tilted position.
See also:
Information contained on the tire sidewall
Both U.S. and Canada Federal regulations require tire manufacturers to
place standardized information on the sidewall of all tires. This
information identifies and describes the fundamental charac ...
BLIS and/or CTA fault operation
If the BLIS and/or CTA senses a fault on either the left or right sensor,
the BLIS alert indicator will go on and remain on and the message
center will display BLIND SPOT SYSTEM FAULT or CROSS TRA ...
Replacing headlamp bulbs
High beam/low beam bulb replacement
For driver side replacement of the high beam/low beam bulbs, do the
following:
1. Make sure the headlamp switch is in the off position, then open the
hood.
2 ...
