Anti-theft indicator

The anti-theft indicator is located in the instrument panel cluster.

• When the ignition is in the off position, the indicator will flash once every two seconds to indicate the SecuriLock system is functioning as a theft deterrent.
• When the ignition is in the on position, the indicator will glow for three seconds to indicate normal system functionality.
If a problem occurs with the SecuriLock system, the indicator will flash rapidly or glow steadily when the ignition is in the on position. If this occurs, turn the ignition off then back to on to make sure there was no electronic interference with the programmed key. If the vehicle doesn’t start, try to start it with the 2nd programmed key and if successful contact your authorized dealership for key replacement. If the indicator still flashes rapidly or glows steadily, the vehicle will not start, contact your authorized dealer as soon as possible for service.
See also:
Tire and wheel alignment
A bad jolt from hitting a curb or pothole can cause the front end of your
vehicle to become misaligned or cause damage to your tires. If your
vehicle seems to pull to one side when you’re driving, ...
Resuming the set speed
Press and release RES/CNCL. This will automatically return the vehicle
to the previously set speed. The set speed will display continuously in
the message center while ACC is active.
Note: Resu ...
Programming spare keys
You can program your own integrated keyhead transmitters or standard
SecuriLock coded keys to your vehicle. This procedure will program
both the engine immobilizer key code and the remote entry tr ...
