See also:

Programming MyKey optional settings
Turn the ignition on using an admin key. To program the optional settings, use the message center buttons to do the following: 1. Get into main menu, select SETTINGS then MYKEY by pressing the ...

Positions of the ignition
1. Off— locks the gearshift lever and allows key removal. This position also shuts the engine and all electrical accessories off. Note: In order to switch off the engine while the vehicle ...

Removing the jumper cables
Remove the jumper cables in the reverse order that they were connected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove ...