Triggering the anti-theft system

The armed system will be triggered if:
• Any door, the hood or the trunk is opened without using the door key, keypad or the remote entry transmitter portion of your IKT.
• The ignition is turned to the 3 (on) position with an invalid SecuriLock key.
See also:
Erasing the function button codes
Note: You cannot erase individual
buttons.
1. Press and hold the outer two
function buttons simultaneously for
approximately 20 seconds until the
LED lamps above the buttons flash
rapid ...
High beams
Pull the lever fully past the detent
to activate. Pull the lever fully again
to deactivate. ...
Hazard flasher control
The hazard flasher control is located
on the instrument panel by the
radio. The hazard flashers will
operate when the ignition is in any
position or if the key is not in the
ignition.
• P ...
