Getting the services you need

See also:
Replacing rear brake/tail/turn and sidemarker lamp bulbs
The brake/tail/turn/side marker lamp and backup bulbs are located in the
tail lamp assembly. Follow the same steps to replace the bulbs.
Note: Your vehicle is equipped with a tail lamp assembly c ...
Create a MyKey
To program MyKey on one of the keys programmed to the vehicle,
insert the key that you want to make a MyKey into the ignition. Turn
the ignition on. Use the message center buttons to do the follow ...
Keyless entry keypad procedure
1. Turn the ignition to the off
position.
2. Close all the doors.
3. Enter factory–set 5–digit entry
code.
4. Press and hold the 3 • 4. While holding the 3 • 4, press and release
the 7 • ...
