See also:

Replacing supplemental park bulbs
1. Make sure the headlamp switch is in the off position, then open the hood. 2. At the wheel well, remove the press pins from the splash shield, then pull the splash shield back to gain a ...

Blocked sensor
An extreme build-up of materials on the quarter panel fascias such as mud or snow can cause degraded performance of the BLIS . Also, heavy rain can cause the same effect. The BLIS can detect ...

Increasing speed while using speed control
To set a higher speed: • Press and hold SET + until you get to the desired speed, then release. You can also use SET + to operate the tap-up function. Press and release SET + to increase the v ...