See also:

Replacing the battery
The intelligent access key (IA key) uses one coin type three-volt lithium battery CR2032 or equivalent. To replace the battery: 1. Remove the backup key from the transmitter, then twist a th ...

Replacing supplemental park bulbs
1. Make sure the headlamp switch is in the off position, then open the hood. 2. At the wheel well, remove the press pins from the splash shield, then pull the splash shield back to gain a ...

Removing the jumper cables
Remove the jumper cables in the reverse order that they were connected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove ...