See also:

Replacing headlamp bulbs
High beam/low beam bulb replacement For driver side replacement of the high beam/low beam bulbs, do the following: 1. Make sure the headlamp switch is in the off position, then open the hood. 2 ...

Overriding adaptive cruise control
WARNING: Whenever the driver is overriding the ACC by pressing the accelerator pedal, the ACC will not automatically apply the brakes to maintain separation from any vehicle ahead. The set speed ...

Using speed control
The speed controls are located on the steering wheel. The following buttons work with speed control: SET: Press to set a speed or to increase or decrease the set speed. RES (Resume): Press t ...