Replacing stop/tail/turn and side marker bulbs

Your vehicle is equipped with a rear lamp that has a stop/tail/turn and side marker lamp module containing integral multiple light emitting diodes (LED). If one or more LEDs burn out, the complete lamp module has to be replaced. See your authorized dealer for the replacement lamp.
See also:
Unlocking and locking the doors using keyless entry
To unlock the driver’s door, enter the factory set 5-digit code or
your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate. Note: If ...
Battery saver
The battery saver will shut off the lamps 10 minutes after the ignition
has been turned off.
• If the dome lamps were turned on using the panel dimmer control, the
battery saver will shut them ...
Replacing front parking lamp/turn signal/sidemarker bulbs
1. Make sure headlamp switch is in the off position, then open the hood.
2. Reach in behind the headlamp assembly to access the bulb sockets
and connectors.
3. Locate the parking/turn signal
l ...
