What you should know about automotive fuels
See also:
Connecting the jumper cables
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
1. Connect the positive (+) jumper
cable to the positive (+) terminal of
the discha ...
Autounlock feature (if enabled)
The autounlock feature will unlock all the doors when:
• the ignition is on, all the doors are closed, and the vehicle has been in
motion at a speed greater than 12 mph (20 km/h);
• the vehicle ...
BLIS and/or CTA fault operation
If the BLIS and/or CTA senses a fault on either the left or right sensor,
the BLIS alert indicator will go on and remain on and the message
center will display BLIND SPOT SYSTEM FAULT or CROSS TRA ...