See also:

Power door unlock/lock procedure
Before starting, ensure the ignition is in the off position and all vehicle doors are closed. You must complete Steps 1–5 within 30 seconds or the procedure will have to be repeated. If the proced ...

Changing the set speed
There are three ways to change the set speed: • Accelerate or brake to the desired speed and press SET upward and release. • Increase or decrease the speed by holding SET upward or downward u ...

Jump Starting
1. Start the engine of the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both en ...