Trailer tow connector (vehicles equipped with a Class II trailertow/prep package)
The trailer tow connector is located under the rear bumper, on the driver’s side of the vehicle.
Refer to the following chart for information regarding the factory-equipped trailer tow connector:
See also:
Arming the system
The system is ready to arm whenever the ignition is off. To arm the
system, do one of the following:
• Press the control on the remote
entry transmitter.
Note: If you press the control
t ...
Resuming the set speed
Press and release RES/CNCL. This will automatically return the vehicle
to the previously set speed. The set speed will display continuously in
the message center while ACC is active.
Note: Resu ...
Changing the wiper blades
1. Pull the wiper arm away from the
vehicle. Turn the blade at an angle
from the wiper arm. Press the lock
tab to release the blade and pull the
wiper blade down toward the
windshield to r ...