See also:

Aiming the headlamps
The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident the alignment of your headlamps should be checked by your authorized dealer. Verti ...

Replacing supplemental park bulbs
1. Make sure the headlamp switch is in the off position, then open the hood. 2. At the wheel well, remove the press pins from the splash shield, then pull the splash shield back to gain a ...

Collision warning system limitations
Due to the nature of radar technology, there may be certain instances where vehicles will not provide a collision warning. These include: • Stationary or slow moving vehicles below 6 mph (10 km/h ...