Remote entry system
The intelligent access keys (IA key) comply with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The typical operating range for your transmitter is approximately 33 feet (10 meters). A decrease in operating range could be caused by:
• weather conditions,
• nearby radio towers,
• structures around the vehicle, or
• other vehicles parked next to your vehicle.
The transmitter allows you to:
• remotely unlock the vehicle doors .
• remotely lock all the vehicle doors .
• remotely open the trunk .
• activate the personal alarm .
• arm and disarm the perimeter anti-theft system.
• operate the illuminated entry feature.
• activate the global opening windows feature.
Refer to Intelligent access in this section for more features.
The remote entry lock/unlock feature operates in any ignition position except while the vehicle is in the start position. The panic feature operates with the ignition off.
If there are problems with the remote entry system, make sure to take ALL intelligent access keys with you to the authorized dealer in order to aid in troubleshooting the problem.
See also:
Wheel lug nut torque specifications
Retighten the lug nuts to the specified torque within 100 miles (160 km)
after any wheel disturbance (rotation, flat tire, wheel removal, etc.).
WARNING: When a wheel is installed, always remove ...
Away from home
If you are away from home when your vehicle needs service, contact the
Ford Customer Relationship Center or use the online resources listed
below to find the nearest authorized dealer.
In the U ...
Create a MyKey
To program MyKey on one of the keys programmed to the vehicle,
insert the key that you want to make a MyKey into the ignition. Turn
the ignition on. Use the message center buttons to do the follow ...