Securicode™ keyless entry system
You can use the keyless entry keypad to:
• lock or unlock the doors without
using a key.
• recall memory seat/power mirrors
positions.
• enable/disable autolock and autounlock.
• program/erase user codes.
• arm/disarm the perimeter alarm system.
The keypad can be operated with the factory set 5-digit entry code; this code is located on the owner’s wallet card in the glove box and is available from your authorized dealer. You can also create up to five of your own 5-digit personal entry codes.
When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.
See also:
Replacing backup lamp/supplemental tail lamp
The backup lamp and supplemental tail lamps are located in the trunk
lid. Follow the same steps to replace either lamp.
1. Make sure the headlamp switch is
in the off position and open trunk ...
Checking automatic transmission fluid at cool temperature (59°F-77°F
[15°C-25°C])
If a fluid check is necessary at a low
fluid temperature (59°F-77°F
[15°C-25°C]), perform the check
using the cold range on the dipstick.
However, the fluid must be
re-checked at the proper ...
Overhead console
The appearance of your vehicle’s overhead console will vary according to
your option package.
Storage compartment
The storage compartment may be
used to store a pair of sunglasses.
Press th ...