See also:

Starting your vehicle
This system meets all Canadian interference-causing equipment standard requirements regulating the impulse electrical field strength of radio noise. Don’t press the accelerator before or during ...

Replacing rear turn signal bulbs
1. Make sure the headlamp switch is in the off position and open the trunk. 2. Lift out trunk floor carpeting panel to access a luggage scuff plate (hard molding) and a trunk side panel (dark gre ...

Replacing supplemental park bulbs
1. Make sure the headlamp switch is in the off position, then open the hood. 2. At the wheel well, remove the press pins from the splash shield, then pull the splash shield back to gain a ...